The ZDT2 series DC motors developed by Xi'an Simo Motor are new products designed and manufactured using the latest technologies. They are based on the Z series medium - sized DC motors of our factory and are specifically used to drive the rollers of sugarcane crushers. The performance, external installation dimensions, and technical requirements of this series of motors comply with both national standards (GB) and the standards of the International Electrotechnical Commission (IEC). The mechanical dimensions and tolerances of all parts of the motors conform to the standards of the International Organization for Standardization (ISO).
- The Xi'an Simo ZDT2 series DC motors can be installed in relatively harsh environments. However, the correct cooling method and protection level must be selected to keep the interior of the motor clean.
- The cooling air of the ZDT2 series motors should not contain gases such as acids and alkalis that can damage the insulation and commutation performance of the motor.
- The ZDT2 series motors are suitable for use in wet tropical regions, and the ambient air temperature should not exceed 40°C.
- The power supply for the ZDT2 series motors can be a static rectifier power supply or a DC generator power supply.
- When the motor is powered by a static rectifier power supply, the number of pulsation waves of the rectifier should not be less than 6. At the rated base speed, rated voltage, and rated load current, the peak ripple factor of the power supply should not exceed 10%, and it is allowed not to connect an external smoothing reactor.
According to the standards of GB/T4942.1 and IEC34 - 5 "Degree of Protection Provided by the Enclosure of Electric Machines", the protection levels of the Xi'an Simo ZDT2 series DC motors are IP23 and IP44. According to the standards of GB/T1993 and IEC34 - 6 "Methods of Cooling of Electric Machines", there are three cooling methods: IC06, IC17, and IC37. The standard form of the cooling air inlet of this series of motors is at the driving end (non - commutator end) of the motor.
The installation types of this series of motors comply with GB997 and IEC34 - 7 "Designation for Construction and Mounting Arrangement of Electric Machines". The standard is IM1001 end - cover type bearing, foot mounting, and single cylindrical shaft extension. It can be derived into IM1002 end - cover type bearing, foot mounting, and double cylindrical shaft extension.
The position of the motor terminal box, when viewed from the driving end (non - commutator end), is on the right side of the frame (i.e., the normal box position). If the user requires the terminal box to be on the other side of the frame, indicate the reverse box position when placing the order. The basic shaft extension of the motor is a single shaft extension, and when facing the terminal box (normal box), the shaft extension direction is a left shaft extension. If the user needs it, it can also be made into a double shaft extension. The basic rotation direction of the shaft, when viewed from the commutator end, is counterclockwise. The driving method of the motor is connection through an elastic coupling.
- The rating of this series of motors is a continuous working mode S1.
- The standard rated voltages of this series of motors are 440V and 520V. Other voltage levels can also be derived, and it needs to be agreed upon when placing the order.
- The basic excitation mode of this series of motors is separately excited. The excitation winding has four terminal leads, which are divided into two groups. When the two groups are connected in series, the excitation voltage is 220V. Other excitation voltage levels can be agreed upon when placing the order.
- The short - time overload capacity of this series of motors: the overload capacity at the base speed is 2.5 times the rated current, and the overload capacity at high speed is 1.8 times the rated current.
- The allowable current change rate (di/dt) is up to 200 times the rated current per second.
According to the needs of users, the motor can be designed to be able to attach components such as a tachogenerator, pulse generator, centrifugal switch, and brake. Specific requirements can be negotiated with our factory.
Note: The specifications, power, and weak magnetic speed regulation range in the technical data sheet are for reference only. In order to continuously adopt new technologies and materials, the data in the table may change.
Xi'an Simo Motor (Group) Co., Ltd. is a large domestic enterprise specialized in manufacturing large and medium - sized, high and low - voltage, AC and DC motors. It is a systematic power system provider integrating motor design and manufacturing, electrical control, mechanical processing, mold, casting, transportation, and other automation and complete projects. Its production and sales scale ranks among the top in the national motor industry, maintaining a high - speed growth trend for 7 consecutive years. It was shortlisted in the top 500 of China's machinery industry in 2004 and ranked 58th in China's electrical industry in 2005. In 1995, it took the lead in obtaining the ISO9001 - 1994 quality system certification in the industry. In August 2005, it passed the ISO9001 - 2000 quality system certification of the China Quality Certification Center (CQC). In May 2006, it passed the ISO14000 environmental management system and OHSAS18000 occupational health and safety management system certifications. At the same time, it passed the European "CE", American "UL", and national mandatory "CCC" certifications. It is a quality and credit AAA - level enterprise. Its leading products have successively won honorary titles such as "Ministry/Provincial/Municipal Famous Brand Products", "Xi'an Inspection - free Products", and "China Glory Famous Brand Products".
In order to improve the quality of various electromechanical products, strengthen pre - sales and after - sales services, and make customers feel at ease and satisfied, Simo Motor resolutely implements the "Quality Assurance Statement" of eight scientific research and design institutes in the machine tool industry of the Ministry of Machinery Industry, conscientiously implements all the clauses in the statement, and strictly follows the rules and regulations of the ISO9001:2000 quality management system to ensure:
- Seriously implement relevant national standards, and strictly manufacture and inspect the products according to the standards or contract technical requirements. Unqualified products will not leave the factory.
- After the final assembly and on - line commissioning of various finished products such as product measurement bases, the assembly personnel conduct a 72 - hour running test before delivery. Strictly conduct running - in tests and reliability tests according to relevant standards to improve the reliability of new products and eliminate early failures.
- Under normal sales conditions, the above - mentioned finished products are delivered strictly on schedule. Functional components are guaranteed to be supplied within three months, and can be supplied in advance in special cases. In case of delay, compensation will be implemented according to the "1997 New Measures for Quality Improvement".
- When customers find quality problems during the use of products, a reply will be made within 24 hours after receiving the customer's notice. For on - site services, start within 48 hours and ensure that maintenance personnel do not withdraw until the fault is eliminated.
- Complete technical documents are provided when the product leaves the factory. All product quality problems are covered by three guarantees (repair, replacement, return). If the product still does not meet the factory requirements after repair, the product will be returned or replaced.
- Simo Motor products are guaranteed for lifetime maintenance at cost after being sold.
- Before placing an order, please refer to the Simo Motor product catalog to determine the model specifications and other data of the required product. Try to select the standard specification products listed in the catalog. Please indicate the motor model, power, voltage, rotation speed, excitation method, excitation voltage, and structural installation type in the order contract, such as ZDT2 - 450 - 3 500KW 440V 650r/min separately excited 220V, horizontal type with feet or IMB3.
- When there are special requirements for the motor products, such as double shaft extension, reverse terminal box position, reverse rotation of the shaft, etc., they need to be clearly indicated in the contract.
- If the required variety and specification are beyond those listed in the Simo Motor catalog, or there are other special requirements, a contract or a trial production agreement should be signed after mutual negotiation and agreement.
- Except for the shaft extension key of the motor, all accessories of various products are not within the supply scope. If the user needs accessories or spare parts, such as carbon brushes, brush holders, etc., please indicate the names and quantities of the required accessories or spare parts in the contract in advance.
簡體中文
